Vendor: PRICE ON APPLICATION
Type: System
Price:
0.00
Rainwater Harvesting for a home, everything you need to collect, filter and reuse rainwater around your house. (Main tank supplied by others.)
Quick Overview
- saving of up to 100 % potable water
- more independence from potable water supplier
- suitable for showering and bathing
- ideal for retrofitting existing rainwater harvesting systems
- suitable for all types of tanks
- ideal for the supply of all consumers in the dwelling
- incl. highly efficient, self-cleaning PURAIN filter, skimmer, backflow valve and inlet calmer
- incl. fully automatic DVGW-certified RAINMASTER Favorit pump and control unit with mains water top up
- speed control, thereby 70% quieter, 40% less power consumption and 40% longer durability
- soft and low lime rainwater
- TOP quality
The package includes nearly all components for creating a perfect rainwater harvesting system except tanks and pipes, for the supply to larger dwellings and gardens. The rainwater is pre-filtered through the highly efficient PURAIN filter before it is fed to the tank. The skimmer overflow of the PURAIN filter removes the surface contaminants. The built-in backflow valve prevents the intrusion of small animals and contaminants. The inlet calmer prevents swirling of the bottom sediments. The rainwater is ultra-filtered with the AQUALOOP membrane station and routed to a clean water tank in the basement. The most economical and quiet RAINMASTER Favorit-SC draws the micro-filtered water from the clean water tank via a floating suction filter and supplies precious, clean, sterilised and lime-deficient rainwater to the water consumers such as toilets, washing machine, shower, bathtubs and garden systems. If there is not enough rainwater in the tank anymore, potable water is automatically sourced via the DVGW-tested RAINMASTER, that can be installed almost anywhere in the house.
The requirements of the EC directive "water intended for human consumption" are fulfilled, therefore the treated water can be used by private individuals (at home) for body care.
Remark
The inspection of the water quality, as well as the maintenance of the installation are the responsibility of the user. The water may only be used for your own use.
Drinking water from rainwater (House Rainwater Source)
consist off:
Vendor: ALOAQUA
Type: Heat Recovery
Price:
105.00
- 1 x T-piece, 2 angles, 1 collar, 1 endcap,
- 2 x PVC connection pieces with O-ring sealing
- 2 x brass double fittings ½”M tread, self-sealing
- 2 x wall mount 63mm with stair bolt M8
Connection set for ECOshower Pipe 20
]]>
Vendor: ALOAQUA
Type: Heat Recovery
Price:
95.00
- 1 x T-piece, 2 angles, 1 collar, 1 endcap, DN 50 each
- 2 x PVC connection pieces (50 mm) with O-ring sealing
- 2 x brass double fittings ½”M tread, self-sealing
- 2 x wall mount 63mm with stair bolt M8
Connection set for ECOshower Pipe 15
]]>
Vendor: All prices are GST exclusive
Type: Heat Recovery
Price:
139.00
- 1 accurately fitting adhesive frame 1100 x 300mm
- 1 cartridge with sealant
Mounting kit for ECOshower Drain 800 and 900
]]>
Vendor: PRICE ON APPLICATION
Type: System
Price:
0.00
Ensures that your water supply inside your house is free of bacteria and most viruses.
System is suitable for a household for up to 4 inhabitants, bigger systems are available on request. Please contact: [email protected]
System consist of:
2x 500 ltr plastic tanks, suitable for potable water (different sizes and material available)
1x AQUALOOP membrane and station including controller, sufficient to produce up to 1500 ltr of bacteria free water each day, life expectancy of up to 10 years
1x ALOAQUA Pump kit 80 ltr/min incl. accessories
The Water Treatment system Full House, consists of 2 x 500 liter tank. Dependable on the water source is it either toped up (mains water supply) or pumped via a submersible pump (bore or surface water) into the reactor tank.
An AQUALOOP membrane station including membrane and controller sterilizes the rainwater and transfers it to the adjacent 500 ltr tank. The membrane holds back 99.9999% of all bacteria and also 99.7 of all viruses.
The efficient ALOAQUA Pump kit draws the cleanest water from the tanks via a floating suction filter and supplies the water to the consumers such as showers, bath etc.
A building and/or resource consent might be required; please check with your local council.
Supply only - Installation can be arranged on request.
A range of different tank sizes and materials, including stainless steel are available on request.
- 2 x 500 ltr tank (black)
- Dimensions (Ø x H): 840 x 1257 mm
- Weight: 19 kg
- Approved and compliant with: AS/NZS 4766:2006
- Inspection lid Ø: 400
- UV stabilized
- AQUALOOP membrane and controller
- Floating suction device with coarse filter ½”
- ALOAQUA Pumping kit
- max. working pressure: 4,5 bar
- max. flow rate: 80 l/min
- speed control
- especially durable, quiet and economical
Not included:
- mains supply water top up - Refill unit 230 V 1/2" with floating switch
or
- submersible pump including floating switches - Submersible stainless steel pump up to 250 litres min, Hmax 10 m
Please contact us for your exact requirement.
]]>
Vendor: PRICE ON APPLICATION
Type: System
Price:
0.00
The Full House Rainwater Utilization and Sterilization System, for collecting, filtering and reuse rainwater for everything in the house. System produces germ free potable water.
It consists of a 7500 liter tank with a preinstalled PURAIN filter with calmed inlet. The rainwater is pre-filtered through the self-cleaning, highly efficient PURAIN filter before it is fed to the tank. The inlet calmer prevents swirling of floor sediments. The skimmer overflow of the PURAIN filter removes the surface contaminants. The built-in backflow valve prevents the intrusion of small animals and contaminants.
An AQUALOOP membrane station including membrane and controller sterilizes the rainwater and transfers it to the adjacent 500 ltr tank. The membrane holds back 99.9999% of all bacteria and also 99.7 of all viruses.
The efficient RAINMASTER Favorit 20 SC draws the cleanest water from the tanks via a floating suction filter and supplies the water to the consumers such as showers, bath etc. It switches over to mains water supply if there is not enough rainwater in the tanks. The RAINMASTER Favorit 20SC can be installed almost anywhere in the house.
A building and/or resource consent might be required; please check with your local council.
Supply only - Installation can be arranged on request.
A range of different tank sizes and materials, including stainless steel are available on request.
- 7500 ltr tank
- Dimensions (Ø x H): 2500 x 1915 mm
- Weight: 150 kg
- Approved and compliant with: AS/NZS 4766:2006
- Inspection lid Ø: 400
- UV stabilized
- 1 x 500 ltr tank (black)
- Dimensions (Ø x H): 840 x 1257 mm
- Weight: 19 kg
- Approved and compliant with: AS/NZS 4766:2006
- Inspection lid Ø: 400
- UV stabilized
- AQUALOOP membrane and controller
- PURAIN PF100 Filter
- Low maintenance
- sturdy design
- Mesh size: 0.8mm
- PLURAFIT inlet calmer
- Floating suction device with coarse filter ½”
- Wall bushings DN 100
- RAINMASTER Favorit 20 speed control
- max. working pressure: 4,5 bar
- max. flow rate: 80 l/min
- speed control
- especially durable, quiet and economical
Vendor: PRICE ON APPLICATION
Type: System
Price:
0.00
Greywater recycling + Rainwater harvesting combined in one system.
Collecting bathroom greywater (shower, sink and tub), treating it with the AQUALOOP system and transfer the treated water to the rainwater tank (2000 ltr, bigger tanks available on request). Rainwater tank equipped with PURAIN filter and calmed inlet. The quiet RAINMASTER Eco draws the cleanest water from the tank via a floating suction filter and supplies precious, clean, and soft rainwater to the consumers such as toilets, washing machine and garden systems. It switches over to mains water supply if there is not enough rainwater in the tank. The RAINMASTER Eco can be installed almost anywhere in the house.
This system is ideal for the supply of toilets, washing machines and small irrigation systems.
A building and/or resource consent might be required; please check with your local council.
- 1 x 500 ltr tank (black)
- Dimensions (Ø x H): 840 x 1257 mm
- Weight: 19 kg
- Approved and compliant with: AS/NZS 4766:2006
- Inspection lid Ø: 400
- UV stabilized
- Including AQUALOOP greywater recycling system for up to 6 inhabitants
- 1 x 2000 ltr tank
- Dimensions (Ø x H): 1500 x 1485 mm
- Weight: 50 kg
- Approved and compliant with: AS/NZS 4766:2006
- Inspection lid Ø: 400
- UV stabilized
- Colours available: black, mist green, beige, heritage green
- PURAIN PF100 Filter
- Low maintenance
- sturdy design
- Mesh size: 0.8mm
- PLURAFIT inlet calmer
- Floating suction device with coarse filter ½”
- Wall bushings DN 100
- RAINMASTER ECO 10
- for toilet, washing machine, garden tap and little sprinkler
- noise level: 48 dbA, medium noise emission
- max. volume flow rate: 10 l/min
]]>
Vendor: PRICE ON APPLICATION
Type: System
Price:
0.00
Rainwater Harvesting System for large domestic Dwellings, Hotels, Laundries, Camping Grounds, etc.. Designed to meet the requirement of the project.
- rainwater for secondary use (toilets, washing machine, irrigation)
- rainwater for shower, bath and drinking
Starting from the size of the tank/s, location and material, over the pre-filter and further treatment up to the pumping system, all sized to match each other and the purpose.
In some areas rainwater will be the only water source available and a higher water treatment will be required.
In a urban environment rainwater can be used for flushing toilets and irrigation, thus saving on water and sewage fees and minimizing the carbon footprint of the project.
A building and/or resource consent might be required; please check with your local council.
Please send an enquiry to [email protected]
We will design your system! Send us your plans.
SAMPLE SYSTEM: PURAIN 300 pre-filter, Rainwater external storage tank, 3 x RAINMASTER Favorit 40 SC Triplex pump and control units operating independently, 500 Litre intermedia tank.
]]>
Vendor: PRICE ON APPLICATION
Type: System
Price:
0.00
Recycling Greywater and reusing it for secondary use (toilets, washing machines, irrigation) will save on precious potable water and also on sewage.
AQUALOOP is a modular system and can be designed to treat greywater for up to 200 people. Ideal for hotels, camping grounds, town houses and commercial projects.
Please send an enquiry to [email protected]
We will design your system! Send us your plans.
Greywater from shower, sink, and tub is collected in a bio-reactor, then treated by the AQUALOOP system and transferred to a clean water tank, from where it can be used for toilet flushing, washing machine and garden irrigation. Savings on mains water and sewerage of between 30-40%. The AQUALOOP membrane station can be equipped with multiple filtering membranes.
]]>SAMPLE SYSTEM: AQUALOOP PURAIN 150/200 pre-filter, Greywater external storage tank, 4 x AQUALOOP membrane stations fitted with six membranes each, 4 x blowers, Clean water storage tank, 3 x RAINMASTER Favorit 40 SC Triplex pump and control units operating independently, with a 500 Litre expansion tank.
Vendor: PRICE ON APPLICATION
Type: System
Price:
0.00
Complete Greywater Recycling System for a domestic dwelling with up to 6 inhabitants.
This grey water recycling systems can be used in most single family dwellings. Approximately 2 x 500 liters of storage volume is needed for a single family dwelling. Bathroom greywater from(shower, sink, and tub is collected in the bio reactor (500ltr), treated by the AQUALOOP system and transferred to the clean water tank (500ltr), from where it can be used for toilet flushing, washing machine and garden irrigation. Savings on mains water and sewerage of between 30-40%. The AQUALOOP membrane station is equipped with one filtering membrane.
Aqualoop is a modular system and can treat water for up to 200 people. Ideal for hotels, camping grounds, town houses and commercial projects. Please send an inquiry to [email protected]
A RAINMASTER ECO 10 pump and control unit is included, to supply the treated water.
A building and/or resource consent might be required; please check with your local council.
- 2 x 500 ltr tank (black)
- Dimensions (Ø x H): 840 x 1257 mm
- Weight: 19 kg
- Approved and compliant with: AS/NZS 4766:2006
- Inspection lid Ø: 400
- UV stabilized
- Complete AQUALOOP greywater recycling system for up to 6 inhabitants
]]>
AQUALOOP is an Onsite Residential and Commercial Water Reuse Treatment certified by NSF INTERNATIONAL. The NSF certification mark on a product means that the product complies with all public health standard requirements.
Vendor: All prices are GST exclusive
Type: Drainmax
Price:
265.00
- Special fabric as underlay for the DRAINMAX tunnel
- Suitable for high pressure flushing
- Very high load capacity
- High water permeability
- Material: Polypropylen PP staple fibres
- Material type: Woven fabric
- Roll width: 2,00 m
- Roll length: 100 m
- Thickness: 1,10 mm
- Areal weight: 190 g/m²
- Resistance to static puncture: >3960 N to EN ISO 12236
- Tensile strength MD / CD: 40 / 40 kN/m to EN ISO 10319
- Elongation MD / CD: 10 / 8 %
- Opening size: 0,2 mm
- Permeability: 29 l/sm²
- Certified: ivg, Nr. 3144
The woven geotextile is particularly suitable as an underlay below the DRAINMAX tunnel. The specially woven fabric is a particularly robust geotextile that can withstand heavy loads and has outstanding long-term water permeability. The smooth and slide-resistant type of geotextile enables cleaning of infiltration floor through high pressure cleaners. The certified geotextile for approved DRAINMAX Tunnel is compliant with DIBT.
Minimum order 10 meters.
]]>
Vendor: All prices are GST exclusive
Type: Drainmax
Price:
166.00
- Special filter fabric as overlay for the DRAINMAX tunnel or as separator geotextile
- Very high load capacity
- High water permeability
- Material: Polypropylen PP staple fibres
- Roll width: 2,50 m
- Roll length: 100 m
- Thickness: 2,7 mm
- Areal weight: 300 g/m²
- Resistance to static puncture: >3500 N to EN ISO 12236
- Robustness class: GRK 5
- Tensile Strength MD / CD: 24 / 28 kN / m to EN ISO 10319
- Elongation MD / CD: 70 / 80 %
- Opening size: 0,06 mm
- Permeability: 36 l / sm²
- Certified: ivg, Nr. 3152
The geotextile is specially designed for covering of the DRAINMAX tunnel. The propylene filter fabric is a particularly robust geotextile that can withstand heavy loads. The pollutants are retained, due to its good separation effect, in front of the infiltration system and it provides at the same time exceptional long-term water permeability. The certified geotextile for approved DRAINMAX Tunnel is compliant with DIBT.
Minimum order 10 meters.
]]>
Vendor: All prices are GST exclusive
Type: Filter
Price:
109.15
A simple yet effective way of filtering the water runoff from roofs is provided by the filter basket. The filter basket is hung below the inlet in the rainwater tank. The filtered water is sufficient for simple garden irrigation.
Since the contaminants are collected in this filter, a regular maintenance of the filter is required.
- Material: PP, EPDM, stainless steel
- Mesh size: 0.89mm
- Large Filter surface
- Lower height offset
- Optimum water yield
- Ideal filtration in garden systems
- Overflowing water can be directly infiltrated
- Incl. fixing material (chain)
]]>
Vendor: ALOAQUA
Type: Accessories
Price:
140.93
Rain water drained from roofs and traffic areas are one of the main sources for contamination of surface water, groundwater and soil. The main pollutants, such as heavy metals and petroleum-derived hydrocarbons as well as polycyclic aromatic hydrocarbons are often present in rainwater in the form of dissolved molecules which are not effectively separated by traditional filter systems and rainwater retention basins.
The following parameters must be taken into consideration while constructing such fixed bed adsorber:
- pH-range of the water to be treated: 5 – 10
- Fill level of the Adsorption medium: min. 0.2 m, max. 5 m
- Filter speed: 5 – 20 m/h (optimum: 10 m/h)
- Contact time, with empty receptacle: at least 2.5 min.
PLURAFIT PF 300 SUB-T + R is a substrate for the removal of arsenic, phosphorus, heavy metals and organic contaminants (mineral oils) based on iron hydroxide as part of rain water run-off treatment. The substrate is poured into the substrate cartridge 300 PF-SUB C. PLURAFIT substrate PF 300 SUB-T + R is able to remove substances dissolved in water through adsorption and to retain them permanently. Its high capacity for the above contaminants results in a long filter life and thus an optimal cleaning performance with minimal investment yield.
Recommendation for substrate life time in m³ in years ( with 100m² and 500 mm rainfall / year
Effluent from :
- Uncoated metal roof 301 6
- Metal roof, copper 65 1
- Metal roof, Zinc 33,5 0,5
- inner city traffic zone 347 7
- Material: Iron (III) oxide-hydrocide FeO(OH), Fe(OH)3
- Purification of road runoff water
- Purification of drain water from metal surfaces
- Long lifetime
- Is also used in DIBT (German Institute for Building Technology) approved facilities
- Based on iron hydroxide
- Adsorption capacity:
- Arsenic, As: 7 – 9 g/kg
- Zinc, Zn: 8 – 10 g/kg
- Phosphorous, P: 12 – 16 g/kg
- Copper, Cu: 6 – 8 g/kg
- Petroleum-derived hydrocarbons: approx. 20 g MKW/kg
Vendor: ALOAQUA
Type: Accessories
Price:
12.55
PLURAFIT Pipe connector for pipes with external diameter of 104 to 110 mm to connected to the PLURAFIT spigots.
- Dimension: (Ø x L): 127 x 125 mm
- Material: PP, TPE
- Incl. lip seals
- Water proof pipe connections
Vendor: ALOAQUA
Type: Sealer
Price:
48.95
PLURAFIT PF 300 Seal special adhesive is used when the PLURAFIT basic components need to be sealed together.
The surfaces of the sealed area must be treated with the provided primer for long lasting and permanent bonding with the gummy adhesive. Traditional silicone-based adhesives do not provide a secure bonded joint on PP and PE plastics.
The quantity of one tube is sufficient for approx. 2 joints (Ø5mm) of 315 mm diameter.
- Material: MS-Polymer
- Volume glue: 85ml
- Volume primer: 10 ml
- Incl. primer
- Elastic seal
- Water proof
Vendor: ALOAQUA
Type: Cover
Price:
291.49
- Dimension (L x W x H): 438 x 438 x 114 mm
- Load: 111 kN
- Material: PP, PVC
- Can be driven over by car
- Incl. duct adapter
- Extremely sturdy design
PLURAFIT PF 300-C 111kN is a chamber cover and can be driven over by a car.
]]>
Vendor: ALOAQUA
Type: Cover
Price:
283.72
PLURAFIT PF 300-C 63kN Grid is a inlet for draining or collecting run-off water with transmission into the ground and can be driven over by a car.
- Dimension (L x W x H): 438 x 438 x 114 mm
- Load: 63 kN
- Load category: cars (domestic)
- Material: PP, PVC
- Lattice design for sink inlet
- Can be driven over by car
- Incl. duct adapter
- Durable design
Vendor: All prices are GST exclusive
Type: Cover
Price:
29.49
- High stability due to ribbing
- UV stabilised
- Built-in withdrawal grip
- 2x connection options for PR-RSDS nozzle
PLURAFIT PF 300-C is a closed cap, which can be used as a ground cover or as a light weight bearing lid for several product applications of the PLURAFIT construction kit.
]]>
Vendor: ALOAQUA
Type: Throttle
Price:
122.77
The throttle insert PF 0.1-3 l/s ensures a throttled flow rate in the connected drainage system. It can be used wherever it is not possible to install the continuous throttle due to space requirements.
Various throttle apetures are available to allow for adjustment.
The maximum runoff / flow rate value is based on the maximum filling level (see Table):
max. filling level
Aperture 0,6 m 0,8 m 1,0 m 1,2 m
No. 1 0,06 l/s 0,07 l/s 0,08 l/s 0,09 l/s
No. 2 0,11 l/s 0,12 l/s 0,14 l/s 0,15 l/s
No. 3 0,17 l/s 0,19 l/s 0,22 l/s 0,24 l/s
No. 4 0,24 l/s 0,28 l/s 0,31 l/s 0,34 l/s
No. 5 0,33 l/s 0,38 l/s 0,42 l/s 0,46 l/s
without aperture 0,67 l/s 0,77 l/s 0,86 l/s 1,00 l/s
- Dimension (L x W x H): 260 x 167 x 350 mm
- Mesh size: 1.5 mm
- Material: stainless steel, PE
- Throttled flow from 0.06 up to 1.0 l/s
Vendor: ALOAQUA
Type: Filter
Price:
79.48
- Pore size disc 1: PPI 10 = coarse
- Pore size disc 2: PPI 20 = average
- Outstanding filter effect
- Mechanical and biological cleaning
- Two different filter porosities
- Exact fit
- Easy removal for cleaning and maintenance purposes
PLURAFIT PF 300 Foam consists of two water-proof filter foam discs with varying porosities, which are inserted in the PF 300-S. This filter foam chamber is suitable as a pond filter as well as for other water treatment applications. Each of the filter foam discs are provided with a pre-cut DN100 insert, which can take an emergency overflow pipe.
]]>
Vendor: ALOAQUA
Type: Filter
Price:
104.23
PLURAFIT PF 300-SUB C is a substrate cartridge to construct a substrate filter chamber. The substrate cartridge consists of a filter basket which can be filled with PF 300-SUB T+R substrate for example. The filter sieve is placed on the threaded rod and screwed into the filter basket for cover. The substrate cartridge can be removed from the chamber for maintenance purposes and filled up with new substrate.
This substrate filter chamber is particularly suited for cleaning street drainage as well as water drained from metal surfaces.
- Mesh size: 1 mm
- Max volume: 10 ltr
- Material: Sieve , stainless steel; filter, PP
- Variably extendable extraction rod
- Easy and optimum maintenance
- The flow can be from top or bottom
Vendor: ALOAQUA
Type: Filter
Price:
39.50
- Dimension (Ø x H): 298 x 245 mm
- Mesh size: 1mm
- Material: PP
- Simple extraction via bucket holder
- Sturdy design
- Large filter surface
- Large filter collecting space
PLURAFIT PF 300-FK is a filter basket, which is used in PF 300-100 Basis and in numerous other PLURAFIT product applications.
This filter can be used for preliminary cleaning in rainwater harvesting systems for example.
]]>
Vendor: ALOAQUA
Type: Filter
Price:
113.50
PLURAFIT PF 300-100-SF is an installation kit for PF 300-100 Basis.
These sedimentation, filter and separator chambers are particularly suitable for pre-cleaning in rainwater infiltration and retention systems.
- Dimension (L x W x H): 260 x 127 x 350 mm
- Mesh size: 3 mm
- Material: stainless steel, PE
- Separator effect by immersion pipe
- Sedimentation with installation in pipe
- Built-in emergency overflow
- Removable stainless steel filter sieve
Vendor: ALOAQUA
Type: Filter
Price:
51.87
- Sieve dimension (Ø x d): 295 x 2.5mm
- Mesh size: 1.34 mm
- Material: stainless steel, PE
- Easy extraction via extendable lifter
- Rust-free stainless steel design
- Pressed edges
PLURAFIT PF 300-M-2 is a stainless steel filter mesh with approx 1 mm mesh size for PF 300-100 Basis.
This filter can be used for rainwater and grey water harvesting or for numerous other applications in water treatment.
]]>