Vendor: All prices are GST exclusive
Type: Drainmax
Price:
158.80
It is with 1.6 m³ a large volume and light plastic tray system that creates a hollow space in the soil. The rain water can be directly retained at the source and will infiltrate through the open soil and side holes. It is also possible to restrict the water flow to the stormwater pipe only. This technology saves significant costs on laying complex piping systems. The DRAINMAX tunnel system can also be used for infiltration of effluent water from sewage plants.
- End section of 100 litres
- for loading capacity SLW 60
- Dimensions LxWxH: 444mm x 1375mm x 736 mm
- Material: PE-HD
- Connections: DN100-300
Vendor: All prices are GST exclusive
Type: Drainmax
Price:
158.80
It is with 1.6 m³ a large volume and light plastic tray system that creates a hollow space in the soil. The rain water can be directly retained at the source and will infiltrate through the open soil and side holes. It is also possible to restrict the water flow to the stormwater pipe only. This technology saves significant costs on laying complex piping systems. The DRAINMAX tunnel system can also be used for infiltration of effluent water from sewage plants.
- Start section of 100 litres
- for loading capacity SLW 60
- Dimensions LxWxH: 444mm x 1375mm x 736 mm
- Material: PE-HD
- Connections: DN100-300
Vendor: All prices are GST exclusive
Type: Drainmax
Price:
4836.80
It is with 1.6 m³ a large volume and light plastic tray system that creates a hollow space in the soil. The rain water can be directly retained at the source and will infiltrate through the open soil and side holes. It is also possible to restrict the water flow to the stormwater pipe only. This technology saves significant costs on laying complex piping systems. The DRAINMAX tunnel system can also be used for infiltration of effluent water from sewage plants.
MINIMUM ORDER of 10 pieces required
- for loading capacity SLW 60
- Dimensions LxWxH: 2340mm x 1375mm x 781 mm
- Material: PE-HD
- washable floor
- best price per m³
Vendor: All prices are GST exclusive
Type: Drainmax
Price:
132.50
It is with 1.6 m³ a large volume- and light plastic tray system that creates a hollow space in the soil. The rain water can be directly retained at the source and will infiltrate through the open soil and side holes. It is also possible to restrict the water flow to the stormwater pipe only. This technology saves significant costs on laying complex piping systems. The DRAINMAX tunnel system can also be used for infiltration of effluent water from sewage plants.
- End section of 100 litres
- for loading capacity SLW 12
- Dimensions LxWxH: 443mm x 1375mm x 767 mm
- Material: PE-HD
- Connections: DN100-300
Vendor: All prices are GST exclusive
Type: Drainmax
Price:
132.50
It is with 1.6 m³ a large volume and light plastic tray system that creates a hollow space in the soil. The rain water can be directly retained at the source and will infiltrate through the open soil and side holes. It is also possible to restrict the water flow to the stormwater pipe only. This technology saves significant costs on laying complex piping systems. The DRAINMAX tunnel system can also be used for infiltration of effluent water from sewage plants.
- Start section of 100 litres
- for loading capacity SLW 12
- Dimensions LxWxH: 443mm x 1375mm x 767 mm
- Material: PE-HD
- Connections: DN100-300
Vendor: PRICE ON APPLICATION
Type: System
Price:
1.00
We design infiltration systems for run-off water from septic tanks and sewage plants. The treated run-off water from the septic tank/ sewage plant is routed into the DRAINMAX Tunnel trench for subsequent infiltration into the ground. The Tunnel trench is covered with a geotextile for protection from soil.
SUPPLY ONLY.
Pipes and earth work not included.
The size of an infiltration system is calculated depending on various parameters such as location, soil properties, etc.
Contact us for your project: [email protected]
It is with 1.6 m³ a large volume- and light plastic tray system that creates a hollow space in the soil. The rain water can be directly retained at the source and will infiltrate through the open soil and side holes. It is also possible to restrict the water flow to the stormwater pipe only. This technology saves significant costs on laying complex piping systems.
| 1: DRAINMAX tunnel | 5: Top layer |
| 2: Backfilling of tunnel from sides and top | 6: Sewage plant |
| 3: Filter fabric | 7: Intake of sewage water |
| 4: Tunnel cover | 8: Ground water level |
Vendor: PRICE ON APPLICATION
Type: System
Price:
1.00
We design rainwater infiltration and attenuation systems for commercial dwellings and properties. The rain- /stormwater from the connected areas is filtered by sedimentation, filtration and separator insertion upstream filter pits and then routed into the DRAINMAX Tunnel trench for subsequent infiltration into the ground. It is also possible to attenuate the water with slow release into the stormwater system. The Tunnel trench is covered with a geotextile for protection from soil.
SUPPLY ONLY.
Pipes and earth work not included.
The size of an infiltration system is calculated depending on various parameters such as roofs, soil properties, etc.
Contact us for your project: [email protected]
It is with 1.6 m³ a large volume- and light plastic tray system that creates a hollow space in the soil. The rain water can be directly retained at the source and will infiltrate through the open soil and side holes. This technology saves significant costs on laying complex piping systems. The DRAINMAX tunnel system can also be used for infiltration of effluent water from sewage plants.
| 1: DRAINMAX tunnel | 7: Sedimentation and filter pit |
| 2: Backfilling of tunnel from sides and top | 8: Flushing pit |
| 3: Filter fabric | 9: Rainwater inflow |
| 4: Tunnel cover | 10: Ground water level |
| 5: Top layer | 11: Base layer of filter fabric |
| 6: Distribution of rainwater |
Vendor: All prices are GST exclusive
Type: System
Price:
1750.00
The package includes almost all components for constructing an infiltration system for a single family dwelling. The rainwater from the connected areas is filtered by sedimentation, filtration and separator insertion in the PLURAFIT filter and then routed into the DRAINMAX Tunnel trench for subsequent infiltration into the ground. The Tunnel trench is covered with a geotextile for protection from soil.
SUPPLY ONLY.
Pipes and earth work not included.
The size of an infiltration system is calculated depending on various parameters such as roofs, soil properties, etc.
Contact us for your project: [email protected]
It is with 1.6 m³ a large volume- and light plastic tray system that creates a hollow space in the soil. The rain water can be directly retained at the source and will infiltrate through the open soil and side holes. It is also possible to restrict the water flow to the stormwater pipe only. This technology saves significant costs on laying complex piping systems. The DRAINMAX tunnel system can also be used for infiltration of effluent water from sewage plants
-
-
1: DRAINMAX tunnel 6: Sedimentation and filter pit 2: Backfilling of tunnel from sides and top 7: Rainwater inflow 3: Filter fabric 8: Ground water level 4: Tunnel cover 9: Biologically active layer 5: Top layer 10: Distance to the base of the building
Vendor: All prices are GST exclusive
Type: Drainmax
Price:
3885.50
It is with 1.6 m³ a large volume- and light plastic tray system that creates a hollow space in the soil. The rain water can be directly retained at the source and will infiltrate through the open soil and side holes. It is also possible to restrict the water flow to the stormwater pipe only. This technology saves significant costs on laying complex piping systems. The DRAINMAX tunnel system can also be used for infiltration of effluent water from sewage plants.
MINIMUM ORDER of 10 pieces required
- for loading capacity SLW 12
- Dimensions LxWxH: 2340mm x 1375mm x 781 mm
- Material: PE-HD
- washable floor
- best price per m³
]]>