Vendor: All prices are GST exclusive
Type: Drainmax
Price:
265.00
The woven geotextile is particularly suitable as an underlay below the DRAINMAX tunnel. The specially woven fabric is a particularly robust geotextile that can withstand heavy loads and has outstanding long-term water permeability. The smooth and slide-resistant type of geotextile enables cleaning of infiltration floor through high pressure cleaners. The certified geotextile for approved DRAINMAX Tunnel is compliant with DIBT.
Minimum order 10 meters.
]]>
Vendor: All prices are GST exclusive
Type: Drainmax
Price:
166.00
The geotextile is specially designed for covering of the DRAINMAX tunnel. The propylene filter fabric is a particularly robust geotextile that can withstand heavy loads. The pollutants are retained, due to its good separation effect, in front of the infiltration system and it provides at the same time exceptional long-term water permeability. The certified geotextile for approved DRAINMAX Tunnel is compliant with DIBT.
Minimum order 10 meters.
]]>
Vendor: All prices are GST exclusive
Type: Filter
Price:
109.15
A simple yet effective way of filtering the water runoff from roofs is provided by the filter basket. The filter basket is hung below the inlet in the rainwater tank. The filtered water is sufficient for simple garden irrigation.
Since the contaminants are collected in this filter, a regular maintenance of the filter is required.
]]>
Vendor: ALOAQUA
Type: Accessories
Price:
140.93
Rain water drained from roofs and traffic areas are one of the main sources for contamination of surface water, groundwater and soil. The main pollutants, such as heavy metals and petroleum-derived hydrocarbons as well as polycyclic aromatic hydrocarbons are often present in rainwater in the form of dissolved molecules which are not effectively separated by traditional filter systems and rainwater retention basins.
The following parameters must be taken into consideration while constructing such fixed bed adsorber:
PLURAFIT PF 300 SUB-T + R is a substrate for the removal of arsenic, phosphorus, heavy metals and organic contaminants (mineral oils) based on iron hydroxide as part of rain water run-off treatment. The substrate is poured into the substrate cartridge 300 PF-SUB C. PLURAFIT substrate PF 300 SUB-T + R is able to remove substances dissolved in water through adsorption and to retain them permanently. Its high capacity for the above contaminants results in a long filter life and thus an optimal cleaning performance with minimal investment yield.
Recommendation for substrate life time in m³ in years ( with 100m² and 500 mm rainfall / year
Effluent from :
- Uncoated metal roof 301 6
- Metal roof, copper 65 1
- Metal roof, Zinc 33,5 0,5
- inner city traffic zone 347 7
Vendor: ALOAQUA
Type: Accessories
Price:
12.55
PLURAFIT Pipe connector for pipes with external diameter of 104 to 110 mm to connected to the PLURAFIT spigots.
Vendor: ALOAQUA
Type: Sealer
Price:
48.95
PLURAFIT PF 300 Seal special adhesive is used when the PLURAFIT basic components need to be sealed together.
The surfaces of the sealed area must be treated with the provided primer for long lasting and permanent bonding with the gummy adhesive. Traditional silicone-based adhesives do not provide a secure bonded joint on PP and PE plastics.
The quantity of one tube is sufficient for approx. 2 joints (Ø5mm) of 315 mm diameter.
Vendor: ALOAQUA
Type: Cover
Price:
291.49
PLURAFIT PF 300-C 111kN is a chamber cover and can be driven over by a car.
]]>
Vendor: ALOAQUA
Type: Cover
Price:
283.72
PLURAFIT PF 300-C 63kN Grid is a inlet for draining or collecting run-off water with transmission into the ground and can be driven over by a car.
Vendor: All prices are GST exclusive
Type: Cover
Price:
29.49
PLURAFIT PF 300-C is a closed cap, which can be used as a ground cover or as a light weight bearing lid for several product applications of the PLURAFIT construction kit.
]]>
Vendor: ALOAQUA
Type: Throttle
Price:
122.77
The throttle insert PF 0.1-3 l/s ensures a throttled flow rate in the connected drainage system. It can be used wherever it is not possible to install the continuous throttle due to space requirements.
Various throttle apetures are available to allow for adjustment.
The maximum runoff / flow rate value is based on the maximum filling level (see Table):
max. filling level
Aperture 0,6 m 0,8 m 1,0 m 1,2 m
No. 1 0,06 l/s 0,07 l/s 0,08 l/s 0,09 l/s
No. 2 0,11 l/s 0,12 l/s 0,14 l/s 0,15 l/s
No. 3 0,17 l/s 0,19 l/s 0,22 l/s 0,24 l/s
No. 4 0,24 l/s 0,28 l/s 0,31 l/s 0,34 l/s
No. 5 0,33 l/s 0,38 l/s 0,42 l/s 0,46 l/s
without aperture 0,67 l/s 0,77 l/s 0,86 l/s 1,00 l/s
Vendor: ALOAQUA
Type: Filter
Price:
79.48
PLURAFIT PF 300 Foam consists of two water-proof filter foam discs with varying porosities, which are inserted in the PF 300-S. This filter foam chamber is suitable as a pond filter as well as for other water treatment applications. Each of the filter foam discs are provided with a pre-cut DN100 insert, which can take an emergency overflow pipe.
]]>
Vendor: ALOAQUA
Type: Filter
Price:
104.23
PLURAFIT PF 300-SUB C is a substrate cartridge to construct a substrate filter chamber. The substrate cartridge consists of a filter basket which can be filled with PF 300-SUB T+R substrate for example. The filter sieve is placed on the threaded rod and screwed into the filter basket for cover. The substrate cartridge can be removed from the chamber for maintenance purposes and filled up with new substrate.
This substrate filter chamber is particularly suited for cleaning street drainage as well as water drained from metal surfaces.
Vendor: ALOAQUA
Type: Filter
Price:
39.50
PLURAFIT PF 300-FK is a filter basket, which is used in PF 300-100 Basis and in numerous other PLURAFIT product applications.
This filter can be used for preliminary cleaning in rainwater harvesting systems for example.
]]>
Vendor: ALOAQUA
Type: Filter
Price:
113.50
PLURAFIT PF 300-100-SF is an installation kit for PF 300-100 Basis.
These sedimentation, filter and separator chambers are particularly suitable for pre-cleaning in rainwater infiltration and retention systems.
Vendor: ALOAQUA
Type: Filter
Price:
51.87
PLURAFIT PF 300-M-2 is a stainless steel filter mesh with approx 1 mm mesh size for PF 300-100 Basis.
This filter can be used for rainwater and grey water harvesting or for numerous other applications in water treatment.
]]>
Vendor: ALOAQUA
Type: Filter
Price:
27.49
PLURAFIT PF 300-100-C is a casing with DN100 pipe connection, which is required as ground connection for various product applications of the PLURAFIT installation kit.high durability due to ribbing
Vendor: All prices are GST exclusive
Type: Filter
Price:
60.27
PLURAFIT PF 300-S is an attachable duct piece. It can be extended in 220 mm increments. The duct is used as collecting space, filter space or for an extension.
]]>
Vendor: All prices are GST exclusive
Type: Filter
Price:
61.90
The PLURAFIT Basis Element is required for most of the product applications of the PLURAFIT construction kit.
]]>
Vendor: ALOAQUA
Type: Chamber
Price:
149.67
The PLURAFIT drainage chamber is used for diverting and controlling the drainage water. Up to 2 drainage lines can be typically connected to the drainage duct. More DN100 connections can be connected to the PF 300-S ducts with the help of PF-100 2-5 seal.
]]>
Vendor: ALOAQUA
Type: Filter
Price:
229.14
The PLURAFIT filter with filter foam can be used for cleaning garden ponds and in several other water filtering applications.
The filter foam with coarse pores is easily inserted in the PF 300-S chamber in the direction of flow before the fine-pored filter basket. It can be easily removed again for cleaning purposes. The incoming water is cleaned both mechanically and biologically via the filter foam.
With the PLURAFIT filter with foam, the emergency overflow can be routed via a pipe insert in the slot of the filter foam or through the opposite connection.
For instance, while using in a pond, a sewage pump extracts the pond water from the deepest position and sends through the PLURAFIT filter intake. Water is returned to the pond after cleaning by the filter. Depending on the degree of contamination or cleaning requirement, a PLURAFIT Filter with sedimentation, filter and separator insert can be connected and a PLURAFIT filter with cartridge can be installed downstream.
Vendor: ALOAQUA
Type: Filter
Price:
108.00
The PLURAFIT filter with filter basket is used for rainwater harvesting and various other applications for filtering water. The PF 300-FK filter basket fits easily placed in the PF 300/100 Basis element and can later be easily removed for emptying by means of the extraction holder.
The filter is best used simultaneously as the overflow. With a full tank, the basket is submerged in the water which dissolves solid contaminants and helps automatic cleaning.
Vendor: ALOAQUA
Type: Filter
Price:
217.56
The PLURAFIT filter with filter basket is used for rainwater harvesting and various other applications for filtering water. The PF 300-FK filter basket fits easily placed in the PF 300/100 Basis element and can later be easily removed for emptying by means of the extraction holder.
Vendor: ALOAQUA
Type: Filter
Price:
188.07
The PLURAFIT filter with filter basket is used for rainwater harvesting and various other applications for filtering water. The PF 300-FK filter basket fits easily placed in the PF 300/100 Basis element and can later be easily removed for emptying by means of the extraction holder.
The filter is best used simultaneously as the overflow. With a full tank, the basket is submerged in the water which dissolves solid contaminants and helps automatic cleaning.
Vendor: ALOAQUA
Type: Filter
Price:
364.82
The PLURAFIT substrate filter chamber, used for removing arsenic, phosphorus, heavy metals and organic contaminants (mineral oils), is based on iron hydroxide as a part of rainwater treatment. The PF 300-SUB T+R substrate is poured into the PF 300-Sub C substrate cartridge, which is then set into the PF 300-100 Basis element. Only the substrate therefore needs to be replaced and not the entire cartridge for maintenance purposes. This minimizes maintenance costs. For instance, the PLURAFIT filter can be used as a pre-filter, with the sedimentation, filtration and separator inserts.
If the filter is inserted into an upwards flow situation (advantage: low height offset and uniform substrate flow), the water flows through the substrate from the bottom upwards. A height offset of > 10 cm must be observed between the inlet and outlet in order to overcome the flow resistance in the substrate. Since the filter material may not be steady in the water, the filter must be drained via a small drainage outlet.
Vendor: ALOAQUA
Type: Filter
Price:
303.57
The PLURAFIT filter with sedimentation, filtration and separation insertion is mostly installed for the preliminary cleaning of the water runoff from slightly loaded surfaces before the rain water infiltration system. The contaminant particles of the inflowing water settle in the inserted filter basket. The water then flows in an upward direction through a submersible stainless steel sieve in the overflow. Fats and oils are separated outside the submersible elbow. Either the stainless steel sieve, or the entire insert, can be removed for maintenance purposes. The filter basket with the collected dirt can then be easily emptied.very good cleaning performance
Calculation of the duct value according to ATV DVWK 153 with various quantities of runoff rainwater.
Duct value D Quantity of runoff rainwater A red