Bathroom greywater (bath, tub and sink) will be collected in a tank, treated with the AQUALOOP system and reused for flushing toilets, the washing machine and irrigation. Thus saving between 30-40% of potable water and sewage.
The RAINMASTER ECO 10 pumping and control unit supplies the treated water to the end users. It switches over to mains water if not enough treated water is available without any loss of comfort for the home owner.
A rainwater harvesting system, also part of the renovation, filters and collects the run-off from the roof in an in-ground rainwater tank.
A pumping unit and UV system will be used to supply the treated water to the house.
More information available;
www.aloaqua.co.nz [email protected] +64 32600 589
]]>
What is rainwater harvesting and how does it work?
Rainwater harvesting is the capture, storage and use of rainwater. Anybody can do it and it can be designed and customized to suit the needs of the user (potable water from rainwater for example).
There are several types of rainwater harvesting systems, the following three are the main ones:
In-situ rainwater harvesting refers to the capture of rainwater where it falls. This system is useful in agricultural production systems where micro-catchments are used. For example Zai Pits ( Wikipedia Zai-Pits).
Run-off catchment is another rainwater harvesting system. Rainwater running of surfaces is channeled through pipes or trenches and collected in storage structures like tanks, ponds, swales (Wikipedia Swale ) and dams, to be used at a later stage or for attenuation and/or infiltration.
Then there are roof catchment systems. These involve capturing rainwater from roof tops and storing it either above or below ground tanks made from plastic, concrete or metal.
Some facts:
- In New Zealand around 10% of the population depend on roof collected rainwater.
- ~ 18% of total water consumption is used for flushing the toilet (domestic).
- ~ 23% of total water consumption is used for the washing machine (domestic).
- ~ 41% ( probably more if you add garden irrigation and outdoor use) of total water consumption could be covered by rainwater
- ~ 27% of total water consumption is used for showering (domestic)
(Watercare)
- Average water consumption per person in New Zealand 227 liters / day (Learnz). Water consumption varies quite significantly between the regions (Queenstown Lakes District Council 416 liter/day)
Advantages of Rainwater Harvesting
1. Low-cost Maintenance
You really don’t need to invest much money to keep the systems going. Purifying the water is not necessary if you don’t intend to drink the water.
2. Lower Water Bills
You can use your collected rainwater for flushing toilets, washing your clothes, and watering the garden. This’ll help in keeping your water bills to a minimum. (Sample system)
3. Great for Irrigation
Rainwater is pure rainwater without any added chemicals into it so you can make sure that this is reliable for irrigation. (Sample System)
4. Reduces Ground Water Demand
As our population increases, so does the demand for water. In many areas, we are reliant on dams, rivers and aquifers for our water sources.
5. Reduces Soil Erosion and Floods
By collecting rainwater, you can minimize the likelihood of flooding around your home and reduce the load on the council stormwater system.
6. Multi-Purpose
You can use rainwater in flushing down toilets, washing your cars and motorcycles, and etc. (Sample System)
Disadvantages of Rainwater Harvesting
1. Unreliable Rainfall
Rain doesn’t fall every day making it hard for you to collect some daily. However, for example, Auckland and other part of the country does not suffer from this compared to other centers.
2. Starting Costs
If you choose to have a rain harvesting system, then the time to implement these systems is when you are building your home as the additional costs are recovered quicker. Allocating funds for a system installed in your home is money well spent and will add value to your home.
3. Chemical roof seepage
Some roof coatings may contain harmful chemicals so it is advisable to talk with one of our consultants first to ensure your roof meets the guidelines.
5. Storage limits
There is a practical limit to how much water you can store on your property and is often limited by your section size and appropriate locations for the tanks . Especially in winter, the rain captured will be greater than the capacity of the tank. Rainwater tanks have to be designed to deal with this situation and to release the excess water to the council stormwater system in accordance with council requirements.
Rainwater Harvesting is a win-win situation for building owners, councils and the environment.
We can give you advice what systems will suit your needs and what is involved.
www.aloaqua.co.nz / [email protected] / + 64 3 2600 589
]]>
Every dwelling, domestic and commercial, should have a rainwater harvesting system! Here's a quick overview what is required in terms of material in order to use the water inside the dwelling for flushing toilets, the washing machine and for irrigation.
By the way, the Homestar rating system offers up to four points for dwellings which reduce the consumption of potable water in and around the dwelling through the collection and use of rainwater.
Apartment developments are also rewarded for incentivizing conservation through individual metering of each dwelling. A water calculator is used to estimate the percentage of household water demand able to be met with rainwater:
Standalone and Terraced Dwellings
(1)
The dwelling has a rainwater harvesting system with a minimum connected roof catchment area of 30m2 per dwelling, connected to a tank with a minimum rainwater holding capacity of 500L per dwelling, with at least one connection to a tap for outdoor water use.
0.5 points
The rainwater harvesting system is connected to and can meet all or part of the water use demand from, laundry, outdoor water use, toilets and dishwasher.
Up to 3.5 points
Apartments
(2)
The development has a rainwater harvesting system with a minimum roof catchment area of at least 30% of available roof area, connected to a tank with a minimum rainwater holding capacity of 5000L, with at least one connection to outdoor water use and /or common area water use.
0.5 point
The rainwater system is connected to and can meet all or part of the usage demand from, laundry (common or individual) and / or toilets and / or dish washing in every dwelling where points are claimed.
Up to 2.5 points
Each apartment dwelling has a separate water check meter that enables each apartment to be billed separately for its water use.
1 point
Rainwater Harvesting System 1
(up to 3.5 points for standalone and terraced dwellings)
In-ground or above ground tanks possible (not included in the below mentioned price)
Material required:
- RURAIN filter DN 100 4. Suction hose 1/2” 5 meter
- PLURAFIT calming inlet DN 100 5. Wall bushing DN 100 (if required)
- Floating suction device ½” 6. RAINMASTER Eco10
Tank sized according to requirements and space available. Different shaped tanks and colors available.
RAINMASTER ECO comes with mains water top up connection and switches over to mains water if the water level in the tank reaches a critical low.
Budget Price (supply only): NZ$ 2,425.- + Gst + Freight (tank not included)
Rainwater Harvesting System 2
(up to 3.5 points for standalone and terraced dwellings,
Apartments up to 2.5 points)
In-ground or above ground tanks possible (not included in the below mentioned price)
Material required:
- PURAIN filter DN 100 4. Pressure hose 1” 5 meters
- PLURAFIT calming inlet DN 100 5. Ground bushing DN 100 (if required)
- Submersible Pump set MULTI-05 6. RAINMASTER D24 fill-level indicator
Tank sized according to requirements and space available. Different shaped tanks and colors available.
A drinking water top-up switches on automatically for periods of shortage and supplies the cistern or tank to a set level.
Budget Price (supply only): NZ$ 2,645.- + Gst + Freight (tank not included)
Please note:
This is a guideline only; bigger pumping units might be required, dependable on the size of the house, number of apartments, toilets, washing- and dish washing machines.
Contact: ALOAQUA Ltd, [email protected] www.aloaqua.co.nz
phone: +64 3 26005879
Aloaqua Ltd, "Conditions of Supply and Sale" apply and are available on request.
]]>
Using rainwater for flushing toilets and washing machines is maybe something new in New Zealand, but is already standard in most European and other countries. Solutions using rainwater for various applications offer new possibilities for property owners, developers and councils.
Rainwater is of such good quality that it can be used as potable water, with the right technology. No bacteria, nitrate and chemicals and instead soft water which causes no calcification in pipes, hot water cylinders and on surfaces.
Mitigating the effect of storm water run off from properties, by retaining and using it on site, reducing the volume of potable water use and offering new areas of work for installers.
Examples of rainwater harvesting and utilization systems: www.aloaqua.co.nz
One manufacturer of rainwater harvesting and greywater recycling equipment in Germany has started to brew it's own beer from rainwater (Brain - http://www.brainwaterbeer.com/) to showcase how good it taste (I had a bottle and it taste really nice).
Rainwater attenuation, - retention
The increase of sealed surfaces in urban areas put additional pressure on the existing stormwater infrastructure. More and more councils require now rainwater attenuation/ retention systems to be installed for new developments. Innovative systems that are cost effective, space saving and require low maintenance are already used in densely populated areas in Europe. More information: Rainwater attenuation/ retention
More info: www.aloaqua.co.nz
contact: ALOAQUA
Phone: +64 3 2600 589
email: [email protected]
]]>
The conventional and common approach to water management involves supplying potable water and disposing of waste - and stormwater. It is becoming increasingly apparent that this conventional, centralized approach must change in response to urbanization trends and climate predictions. As the availability of clean freshwater resources is diminished, it is becoming clear that in particular grey- and stormwater should be viewed as alternative and valuable sources of water, and not just inconveniences needing to be dealt with.
Consequently, rainwater collection and reuse and the reuse of highly treated greywater are attracting increased attention. They are most-commonly provided for non potable end uses but potable reuse is also gaining traction.
Many communities have begun to implement simple and relatively inexpensive water-reuse projects, such as irrigating golf courses and parks, and the benefits of these are seen almost immediately. Benefits from widespread adoption include improved reliability and drought resistance of the water supply, utility savings in infrastructure maintenance and deferred capital expenses, and the immediate rewards of green and lush outdoor recreation spaces.
There are also environmental advantages to consider. The use of reclaimed water ensures the transfer of nutrients to beneficial uses rather than discharging them into receiving waterways. Contamination of bays and lakes with nutrient-rich stormwater and wastewater increases the risk of eutrophication (excessively high nutrient concentrations), the consequences of which include low dissolved oxygen concentrations, algal blooms, and declining shellfish populations and periodic fish kills.
Increased and more widespread use of reclaimed water typically brings with it greater financial, technical, and institutional challenges. Upfront capital costs may be higher, but payback on these water-reclamation systems may be realized sooner by building owners, depending on the region. Regulators and citizens express concerns about the safety of using reclaimed water for domestic purposes because of the perceived risks and uncertainties. These challenges have limited the application of water reuse in the past. However, 21st-century technology, for example the AQUALOOP system, exists to safely produce recycled water at a relatively low costs. Combined with the increased need to do so, we should now be striving for new paradigms in water supply and management.
Water efficiency, conservation
Significant reductions in water use can be made by insisting that water-efficient fixtures meet building code, instead of installing older-style high-flow units. These include water-efficient dual-flush toilets, low-flow showerheads, low-flush urinals, flush less urinals, low-flow faucets, and flow restrictors.
External landscaping with minimal water requirements also promotes water savings. Landscaping can be designed with the use of drought-tolerant species, garden mulch techniques that minimize water losses, and subsurface irrigation methods including automated irrigation systems with rain and moisture sensors to ensure optimum application of irrigation water.
To understand where water savings can be made, a detailed water-balance model of the project should be carried out during the design phase. This process will identify all possible water savings by incorporating uncomplicated water-efficiency strategies into the development design. Using this approach, the use of water-efficient fixtures and water-conservation design strategies can reduce an average retail or commercial development's overall water use by more than 40%.
Identifying water-reuse opportunities
Opportunities associated with the design and installation of water-reuse systems will vary significantly from one building project to the next. Analysis of the water-balance model at the outset of the project will reveal any opportunities for alternate water supply, water conservation, and water recycling. Water-balance modeling will also reveal the availability of rainwater and wastewater that could be captured and treated for reuse.
All aspects of building operations that involve water should be investigated and potential sources of water identified. Both internal and external water sources should be considered.
Treatment infrastructure, which often includes filtration and disinfection, will be required to ensure water is of a suitable quality for its intended use. Relatively clean water sources, such as roof water, are relatively straightforward to collect and are suitable for non-potable use with little pretreatment. Ligh contaminated greywater require a higher degree of treatment to make them fit for use. Greywater recycling methods usually have greater treatment costs than rainwater collection and reuse, but they also have the added advantage of year-round water-source availability—so they are not reliant on seasonal rainfall patterns and climate.
Supplying reclaimed water to non-potable applications where the risk of human contact is very low can be an excellent way of offsetting the consumption of potable-water sources. For example, with cooling tower water, the level of direct human contact is minimal. However, to reduce the risk of illness caused by airborne and waterborne pathogens, the level of disinfection prior to reuse should be in line with the risks involved. Non-potable demands include toilet and urinal flushing, irrigation, and cooling towers. Potable demands include water for kitchen use, showers, and sinks It is important to understand the relative proportions of potable and non-potable demand, and this can be achieved through the water-balancing process.
In office complexes, the amount of water used for toilet and urinal flushing is proportionally higher than the amount used in showers. In apartment-, hotel- and rest home buildings, the opposite is true—water used for bathing and showering exceeds the toilet-flushing demand (see Figure 1).
Buildings and complexes with water-cooled boilers or cooling towers for air conditioning require large volumes of water to feed these systems. Properties with large gardens and lawns tend to use a significant portion of their water budgets for outdoor irrigation.
The current level of public acceptance and regulations in some areas mean little opportunity for the use of harvested or recycled water for potable use. To ensure water reuse is an option, the engineer must manage potential public health, operational, and environmental risks associated with the specific application. The primary risks associated with the use of reclaimed water are:
- Public health, which refers to inadvertent contact with the water and subsequent ingestion of pathogens and toxins, particularly relevant in the health and immunocompromised sectors.
- Environmental, which refers to the accumulation of contaminants in irrigated soils and plants or detrimental hydrological effects as a result of water extraction.
- Availability, which is dependent on rainfall patterns and catchment activities, sizing of treatment plants and buffer tanks, and maintenance schedules and equipment downtime.
- Operational, such as potential clogging and fouling of distribution systems and mechanical equipment with suspended and precipitated solids, and staining of toilet bowls.
Given the different treatment requirements of the various rain- and greywater sources and the potentially different end-use water qualities required, a detailed water-balance and feasibility assessment should be undertaken in all system designs.
- Peter Harbour, PhD, and Robyn Overall, PhD, CJ Arms and Associates
- How is water used? - Dr Lee Bint (BRANZ Sustainable Building Scientist)
]]>
A solution for local infiltration / attenuation of rain-, storm water or run-off from sewage plants.
With DRAINMAX, rain or storm water can be directly retained at the source and either infiltrate into the ground or attenuated and slowly released into the storm water or sewage system. Therefore easing the pressure on the pipework during high rainfall events.
The system can be completely cleaned thus no loss of infiltration capacity or silting up.
Huge storage capacity (1600 ltr/segment), minimum space requirement and quick installation of the DRAINMAX Tunnel are a few advantages of the system.
For more information: www.aloaqua.co.nz
or email: [email protected]
]]>
Rainwater Infiltration - Complete solutions for trench and trough-trench infiltration
Trench System
Trench systems are ideal when the surface above the infiltration system shall be usable, parking, playground etc.
Trough-Trench System
The polluted rainwater is cleaned via bio-active soil and seeps into the underlying trench, where it is stored short term to infiltrate.
Rainwater Retention / Attenuation - to ease pressure on public drainage infrastructure
Trench System
Rainwater is filtered through a sedimentation/ filter shaft, then stored short-term in the in-ground trench and slowly released via the throttle outlet. The system can remain open at the sides and bottom if local infiltration is allowed or desired. The tunnel elements are placed in a layer of EPDM material if a closed system is required.
Under- or above ground Systems
Selection of interconnected tanks, scalable to meet council and local requirements.
