The RAINMASTER Eco is an innovation for rainwater units. It is a fully automatic, operating and monitoring station combining pump, controller and built-in mains water top-up. This unit can easily be installed in the basement, garage or in the ground floor utility room of any single-family dwelling. The rainwater is pumped from a tank via a suction hose and is used internally for toilet flushing, in the washing machine and externally for watering the garden. If the supply of rainwater or greywater runs low then the RAINMASTER Eco automatically switches to mains water top up, so you’re never out of water.

• The optimized central pump and control unit for rainwater harvesting or water reuse for single family dwelling
• For toilet, washing machine, garden tap and little sprinkler
• Noise level: 48 dbA, medium noise emission
• Dimensions (H x B x T): 398 mm x 353 mm x 200 mm
• Weight: 9,75 kg
• Switchable power supply input: 110-230 V AC/50-60Hz
• Switchable power supply output: Output: 24 V DC +/- 5%
• Voltage input control board: 22-28 V DC
• Power input: 90 W
• Max. operating pressure: 3,5 bar
• Max. volume flow rate: 10 l/min
• Max. intake level (self priming): 3.6 m
• Pump start-up pressure: approx. 2,2 bar
• Approved mains water primary pressure: 2,5 - 6 bar
• Max. height between pump and consumer: 10 m
• Connector mains water (BSP): ½” female
• Connector pressure side (BSP): ¾” female, union nut
• Connector intake (BSP): ¾” male
• Connection emergency overflow DN50